• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Wing joiner

General discussion on any topic which doesn't have a natural home on any of the other boards.
JamesH
Posts: 17
Joined: 12 Sep 2021, 20:54
Location: Powys

Wing joiner

Post by JamesH »

Evening I'm building a Scheibe-Loravia Topaz the plan uses a 14mm graupner steel bar & brass box which is like rocking horse 💩.
I can source 12mm and 15mm but what would everyone recommend. Many thanks
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: Wing joiner

Post by chris williams »

James, you can't get the 14mm any more. The 15mm will be fine, just adapt the ply support accordingly... (Note the brass box is 16mm)
JamesH
Posts: 17
Joined: 12 Sep 2021, 20:54
Location: Powys

Re: Wing joiner

Post by JamesH »

chris williams wrote: 05 Jan 2022, 20:34 James, you can't get the 14mm any more. The 15mm will be fine, just adapt the ply support accordingly... (Note the brass box is 16mm)
Thanks for that, as I'm not 100% sure are you the same person as the designer ?? If so ive got 1 more question about the F6a retro fit
User avatar
Trevor
Posts: 161
Joined: 19 Jul 2016, 16:29
Location: Hampshire
Contact:

Re: Wing joiner

Post by Trevor »

Quick Chris - deny everything! 🤫
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: Wing joiner

Post by chris williams »

No prob James, fire away...
Barry_Cole

Re: Wing joiner

Post by Barry_Cole »

Trevor wrote: 05 Jan 2022, 21:55 Quick Chris - deny everything! 🤫
He never learns.....

8-) 8-) 8-) 8-)

BC
JamesH
Posts: 17
Joined: 12 Sep 2021, 20:54
Location: Powys

Re: Wing joiner

Post by JamesH »

:lol: :lol: :lol:
Barry_Cole wrote: 05 Jan 2022, 23:23
Trevor wrote: 05 Jan 2022, 21:55 Quick Chris - deny everything! 🤫
He never learns.....

8-) 8-) 8-) 8-)

BC
JamesH
Posts: 17
Joined: 12 Sep 2021, 20:54
Location: Powys

Re: Wing joiner

Post by JamesH »

chris williams wrote: 05 Jan 2022, 22:14 No prob James, fire away...
Ok on the plan I've got f6a is a piece which is angled in front of former f6 but I've seen a different set of plans where there's a f6a former between f6 and f7. I'm not sure if it should have one there's definitely not one in the laser pack just wondering if it's been missed off by sarik or just not needed cheers.
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: Wing joiner

Post by chris williams »

First up, James, have you had all the build pics from me...!
JamesH
Posts: 17
Joined: 12 Sep 2021, 20:54
Location: Powys

Re: Wing joiner

Post by JamesH »

chris williams wrote: 06 Jan 2022, 09:51 First up, James, have you had all the build pics from me...!
Yes I have
Post Reply