-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Vision pilot
- chris williams
- Posts: 1549
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: Vision pilot
Nice job, Gman...! It just goes to show how much work Wilson puts into his products
- Philkiteflyer
- Posts: 120
- Joined: 17 Mar 2015, 21:53
- Location: Invercargill, NZ
Re: Vision pilot
I have looked at the website for Tailored Pilots and asked auntie google but I cannot find this subsidiary 'Vision' that you mention.
Are you able to share a link to a website please?
Thanks
Phillip C (Pilotless)
New Zealand
"Keep it simple stupid"
- chris williams
- Posts: 1549
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
-
- Posts: 12
- Joined: 21 Dec 2019, 19:06
- Location: Stoke on trent
Re: Vision pilot
Sorry just seen this reply .yes go to tailored pilot's the information should be on there
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Vision pilot
I’ve just searched the Tailored Pilots website out of interest but can find nothing at all concerning Vision pilots!
Perhaps Wilsons hasn’t put it up yet?
Perhaps Wilsons hasn’t put it up yet?
- Cliff Evans
- Posts: 1032
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Vision pilot
One could say that he lacks vision!Peter Balcombe wrote: ↑26 Mar 2022, 20:58 I’ve just searched the Tailored Pilots website out of interest but can find nothing at all concerning Vision pilots!
Perhaps Wilsons hasn’t put it up yet?
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
-
- Posts: 12
- Joined: 21 Dec 2019, 19:06
- Location: Stoke on trent
Re: Vision pilot
I chose to build the pilot with the superb resin head because it was almost perfect and was so easy to work with ,however I wanted to see what can be done with the 3D printed one . It is a lot more work with filling and flatting back the print marks and lines .this is not a problem and it’s what is to be expected with the standard kit ,but with some efforts the finished job is not to bad at all and will add a nice scale looking dude to guide your pride and joy around the sky so here he is warts and all (or lines in this case lol). [
- Philkiteflyer
- Posts: 120
- Joined: 17 Mar 2015, 21:53
- Location: Invercargill, NZ
Re: Vision pilot
Gman, those skin tones are great up close, so at 20m you won't be able to tell them apart. Well done.
Phillip C
Phillip C
"Keep it simple stupid"
-
- Posts: 12
- Joined: 21 Dec 2019, 19:06
- Location: Stoke on trent
Re: Vision pilot
Absolutely m8 the figures Wilson produces are absolutely stunning ,and yes I’ve realised just how much work they must takechris williams wrote: ↑26 Mar 2022, 08:34 Nice job, Gman...! It just goes to show how much work Wilson puts into his products