Unflown (still) I bought this model and then went about installing quality digital servos - I've spent about £600 on her, so looking for something like this in return, I have just run out of room to store her. Not keen to sell, but needs must.
She's big, just fits in my medium wheelbase transit, 5.33m wingspan but around 2.7m long with the rudder attached - not sure if it comes off.
I can supply photos, I'll be at sherlowe and milson but otherwise model is in west Wales.
Cheers, Ell.
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Ka7 1:3 scale
-
- Posts: 335
- Joined: 18 Mar 2015, 08:18
- Location: West Wales
- Contact:
-
- Posts: 1
- Joined: 21 Jun 2023, 22:15
- Location: Somerset
Re: Ka7 1:3 scale
Hi Elliott
Photos please
Will
Photos please
Will
-
- Posts: 335
- Joined: 18 Mar 2015, 08:18
- Location: West Wales
- Contact:
-
- Posts: 123
- Joined: 18 Mar 2015, 06:29
- Location: Lincolnshire, UK
Re: Ka7 1:3 scale
Could well be interested in this if it hasnt sold by the first Milson
-
- Posts: 335
- Joined: 18 Mar 2015, 08:18
- Location: West Wales
- Contact:
Re: Ka7 1:3 scale
Cool Pat
Here's more to whet your whistle.
Part ex's considered too... Just nothing big!
Rigged, despite the howling wind - I think this may be the first time I've put her together, you cannot open the rear canopy with the wings plugged in, the underside of the caonpy needs trimming slightly.
I'll be removing my rx and regulator doodad, happy to sell without the servos too, they are all brand new and completely unused other than for setting throws at this point - airframe only £350.
PM me witrh your email address and I'll send the high def images if you want.
Here's more to whet your whistle.
Part ex's considered too... Just nothing big!
Rigged, despite the howling wind - I think this may be the first time I've put her together, you cannot open the rear canopy with the wings plugged in, the underside of the caonpy needs trimming slightly.
I'll be removing my rx and regulator doodad, happy to sell without the servos too, they are all brand new and completely unused other than for setting throws at this point - airframe only £350.
PM me witrh your email address and I'll send the high def images if you want.
- Cliff Evans
- Posts: 1036
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Ka7 1:3 scale
Here is the full size!
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
-
- Posts: 123
- Joined: 18 Mar 2015, 06:29
- Location: Lincolnshire, UK
Re: Ka7 1:3 scale
PM sent