Page 1 of 1
I really, really, want one...!
Posted: 27 Mar 2015, 17:38
by chris williams
Re: I really, really, want one...!
Posted: 27 Mar 2015, 17:54
by Barry_Cole
Re: I really, really, want one...!
Posted: 27 Mar 2015, 23:49
by C.olson
I want one too
Re: I really, really, want one...!
Posted: 28 Mar 2015, 01:37
by Tom Pack
If you look into them they are quite reasonable priced........ the only downside I see is that you would become very pasty..... what with spending 100% of your time in the shop playing with the thing!
Re: I really, really, want one...!
Posted: 28 Mar 2015, 02:03
by Mike F
Tom
How much are they selling for in the USA?
MIke
Re: I really, really, want one...!
Posted: 28 Mar 2015, 10:54
by Mike Seale
Here's a link showing where you can buy these machines. There is a US dealer
https://www.stepcraft-systems.com/en/retail
Mike
BTW, when you look into it you would need to purchase some more powerful software to get the most from the setup. This will add about £200 or more to the basic system. It still ends up being a reasonably priced system...very tempting
Re: I really, really, want one...!
Posted: 28 Mar 2015, 13:12
by Mike F
I see that they have a sales outlet here in Singapore....same building where the larger RC model shops are located....will take a look next week end.
Re: I really, really, want one...!
Posted: 29 Mar 2015, 13:59
by Martin G
Stepcraft cnc machines are also sold in the UK.
http://stoneycnc.co.uk/
Martin.